Geco WAM2




Used Symbols


The company GeCOSoft mbH located in Neu Ulm, Germany offers solutions for data processing, access control and planning.


Geco WAM2 8.1.2

2N IP Intercom



  • 2N Enhanced Integration or Gold License is required.

How to connect wires

  Installation Diagram

2N IP Intercom / 2N Access Unit and Geco WAM2 are interconnected via network. The door is connected to the WAM2 relay board. When RFID tag is read at 2N IP Intercom / 2N Access Unit, HTTP command is send to the WAM2, which activates the relay to open the door.

2N IP Intercom Settings

  Requirements for 2N IP Intercom

Go to Services – Automation and edit the function. Prepare Automation according to the following picture


  • Format: http://{4}:8080/gecoctrl/N2?App={1}&LeserAdr={2}&AuswNr={3}
  • Param 1: 0
  • Param 2: 0
  • Param 3: Connected to the link Card from the block Card Entered (Card ID is transferred via this link)
  • Param 4: (Geco WAM2 IP address)

Geco WAM2 Settings

  Requirements for Geco WAM2

Cards are stored in the menu Zutrittskontrolle / Ausweis Tabelle. Tested with the card ID: 3F00F318E7

Manual from Allnet: Handbuch 8 Kanal Access Controller Vers. 7_19.pdf


Used Symbols

(tick) - Interoperable

(warning) - Work with limitation

(error) - Incompatible