5. Technical Parameters

Power supply 

• Voltage: 100–240 V AC
• Frequency: 50/60 Hz
• Supply output:
  • 65 W version with support for 2 Cabin switches (2x CS)
  • 120 W version with support for 4 Cabin switches (4x CS)

Power supply backup

• 12 V / 9 Ah internal gel-lead-acid accumulator 
• optional connection of an external higher-capacity gel-lead-acid accumulator

User interface

• Control: web interface
• Default ID/Password: admin/2n
• Device State Indicator: refer to 2.5 Overview of LED Indicators

Internet Protocol

• IPv4
• IPv6

• 464XLAT support

Antenna

• Impedance: 50 Ω
• 2x SMA connector (for main / optional antenna)

DSL (Cabin switch line): 

• 48 V / 1 A version with support for 2 Cabin switches (Cabin switch 1&2)
• 48 V / 1 A version with support for 4 Cabin switches (Cabin switch 3&4)

I/O

• INP:
  • pin1: 10.5 V 5 mA
  • pin2:  input 1 – 47 kOhm serial resistor, < 2 V = LOW,  > 4 V = HIGH, 30 V DC max
  • pin3:  input 2 – 47 kOhm serial resistor, < 2 V = LOW,  > 4 V = HIGH, 30 V DC max
  • pin4: GND
• REL:
  • Contact resistance: 75 mOhm 1 A, 6 V DC
  • Operational contact parameters: 30 V / 1 A DC
  • Max allowed contact current: 2 A

  • Pin 1–2 (4–5): closed at relax (NC)

  • Pin 2–3 (5–6): open at relax (NC)

Frequency bands

• EU version:
  • LTE FDD: B1/B3/B5/B7/B8/B20
  • LTE TDD: B38/B40/B41
  • WCDMA: B1/B5/B8
  • GSM: B3/B
• AU version:

• • LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28
  • LTE TDD: B40
  • WCDMA: B1/B2/B5/B8
  • GSM: B2/B3/B5/B8
• US version:
  • LTE FDD: B2/B4/B12
  • WCDMA: B2/B4/B5

Interface

• PoE: 48 V / 6.5 W max, Class2
• refer to 2.4 Overview of Connectors

Weight

• 2.2 kg without battery pack
• 4.7 kg with battery pack

Dimensions 

• 270 x 240 x80 mm

IP cover

• IP30

Operating temperature: −20 °C to +50 °C 

Storing temperature: −15 °C to +40 °C

Maximum altitude: 2 000 m above sea level

Cabin switch

• Power source: 48 V / 19 W max via DSL line
• Interface:
  • OUT: output for output peripheral connection (12 V DC / 100 mA / 1.2 W)
  • DSL: for connection with the main unit
    • 19 W max consumption (own consumption + OUT port = 4W, 15 W max from PoE LAN 1+2)
  • 4x LAN: 
    • for connection of 4 IP devices of any type, first 2 positions provide PoE (48 V / 7.5 W / port, 15 W aggregate)
    • 10/100BaseT, LAN1/2 PoE, RJ-45; Ca5e or higher (recommended)
• Operating temperature:−20 °C to +50 °C
• IP cover
  • IP30
• Maximum altitude: 2 000 m above sea level
• Dimensions: 145 x 95 x 33 mm