2.1 Before You Start
Product Completeness Check
Check before installation whether the package of the 2N® LiftGate Main Unit includes the following:
1x | 2N® LiftGate Main Unit |
2 pcs + 2 pcs | Dowel (8 x 40 mm) with screws (4.5 x 50 mm) |
1 pc | Antenna |
1 pc | Battery pack |
1 pc | Brief Manual |
Installation Conditions
- 2N® LiftGate should be installed in a lockable room so that the potential risk of unauthorized access and misuse by unauthorized persons can be minimized.
- 2N® LiftGate is designed for vertical mounting.
- Install 2N® LiftGate with respect to the signal strength – check the LED indicator status or display the information via the device web interface.
- For the allowed range of operating temperatures refer to Section 5. Technical Parameters.
- 2N® LiftGate may not be operated on sites exposed to direct solar radiation or near heat sources.
- 2N® LiftGate is designed for indoor applications. It may not be exposed to rain, flowing water, condensing moisture, fog, etc.
- 2N® LiftGate may not be exposed to aggressive gas, acid vapors, solvents, etc.
- Make sure there is enough free space above and under 2N® LiftGate for cabling and flowing air to conduct heat away.
- An improper placing of 2N® LiftGate or the antenna near television, broadcasting or other high-frequency sensitive devices may have an adverse affect on their functionalities.
Caution
- Make sure that you have all requisites for putting 2N® LiftGate in operation (SIM card, LAN-PC interconnecting cable).