Luxriot

Content

About

Version 2

Used Symbols

About

Luxriot® VMS is an open architecture Video Management System (VMS). Luxriot® VMS  accepts MJPEG, MPEG4 and H.264 as well as HD and megapixel video streams from Network (IP) cameras, encoders and video capture boards. Luxriot® VMS is integrated with over 3000 devices from all major manufacturers including ACTi, Arecont Vision, Axis, Hikvision, Messoa, Samsung, SONY, UDP, Vivotek and others. This along with Luxriot® VMS client-server architecture allows to build hybrid scalable solutions from a single NVR/DVR to the multiple server system handling thousands of cameras.

http://www.luxriot.com/

Version 2

Tested Functions

Luxriot 2N IP Intercom Version Scan device Video from 2N IP Intercom Audio from 2N IP Intercom Audio to 2N IP Intercom Switch control Events from 2N IP Intercom

2.5.8.120

2.19.0.28.5

(tick) (tick) (tick) N/A (tick) (error)

2.5.2.765

2.17.0.26.4

(tick) (tick) (error) (error) (warning) (error)

2N IP Intercom Settings

  Requirements for 2N IP Intercom

Enable parameter RTSP Server Enabled in menu Services / Streaming.

Enable Onvif and set authorisation data in menu Services / Onvif.

Tested Features

  Scan device

Start the Local Luxriot Connection. If you do not add camera yet, you can add camera automatically or manually.

Choose between scanning the whole network or in the range of IP address.

After set scan ports, username, password you can see network IP cameras. In the Discovery menu select your camera and then click Next.

  Video from 2N IP Intercom

After adding the camera it will appear in the list of video devices on the left side.

Drag it and drop on one of the screens.

  Audio from 2N IP Intercom

Open Camera Setup Wizard.

Choose camera you want to configure and click on Properties.

Go to Audio tab, flag Internal Audio Source and choose "Input1" as Input.

After that go to View - Panels and click on "Audio Player".

You will see the panel on the right side, where you have to choose enabled audio input as Device.

Now you can close the panel.

  Switch control

Open Camera Setup Wizard.

Choose camera you want to configure and click on Properties.

Go to Digital Outputs tab, flag outputs you want to use, set their Mode to "Switch" and change their User button to "Show".

After that go to View - Panels and click on "Digital Output Control".

Now there are buttons to control outputs.

Required licenses

  • Enhanced Video for RTSP streaming and ONVIF

Used Symbols

(tick) - Compatible

(warning) - Work with limitation

(error) - Incompatible