5. Operational Statuses

This section describes the user scenarios and states that may occur during operation, including the user options and expected results of actions. 

Status and Description User Actions Navigation Actions and Result

Sleep Mode

Only the current date, time and weather are shown on the display.
End relax mode Touch of the display.

Home page/parental lock is displayed.

Parental Lock

Device shows the instruction "Enter PIN code " and codelist.
Parental lock settings Activation of the function and setting of the 4-digit PIN code with subsequent confirmation Parental lock is activated.
Deactivate parental lock Correct PIN entering Device is unlocked.
Enter invalid PIN PIN mistyping

The PIN code reentering command is displayed.

Home Page

Device is in relax mode.
Display Directory

Press the blue backlit phone earpiece button

The list of all available devices is displayed.
Display Call list

Button pressed

The list of all accomplished calls is displayed.
Activate DND mode

Press the button in the top right corner

DND is activated and the activation message is displayed.
Display Settings

Button pressed

The Settings section is displayed.

Access Logs

The device displays a list of all accomplished calls including date, time, status (outgoing/incoming/missed) and information on from/to which destination the call was made.
Show call detail

Press row of selected call

The call detail is displayed.

Outgoing Call

Press button for taking call in call detail

Creation of an outgoing call on the device in the list.
Unlock door

Press lock button in call detail

A call is set up or not depending on the connection type and the door is unlocked. If automatic call end after unlocking is enabled, the call is ended after door unlocking.

Move up and down in list

Press display with finger and slide up or down

The list scrolls up or down in the list. Once the end of the list has been reached, scrolling stops.
Return to Home page

Press back button

Home page is displayed.

Detail in list

The display shows a snapshot from the camera set in the 2N IP intercom if a camera-equipped device initiated the call. A device symbol is displayed if the call initiating device is not equipped with a camera. Furthermore, the call day, date and time, description of the calling/called device and call status (outgoing/incoming/missed) are displayed.
Return to Home page

Press back button 2x

The device returns to Home page.
Return to call list

Press back button 1x

The device returns to the call list.
Outgoing Call

Press the call receiving button

The device gets in the In call state.

Door unlocking

Press the lock button

A call is set up or not depending on the connection type and the door is unlocked. If automatic call end after unlocking is enabled, the call is ended after door unlocking.

Directory  

The device displays a list of destinations that can be called. The destinations include their names and the device type they are equipped with.
Return to Home page

Press back button

Home page is displayed.
Scroll up and down in directory

Press display with finger and slide up or down

The list scrolls up or down in the list. Once the end of the list has been reached, scrolling stops.
Outgoing Call

Press call receipt button in the row of the selected device

The device gets in the In call mode.

Door unlocking

Press the lock button

A call is set up or not depending on the connection type and the door is unlocked. If automatic call end after unlocking is enabled, the call is ended after door unlocking.

Directory format – list

Press icon in top right corner

The list of devices in the directory is displayed one under the other.
Directory format – tiles

Press the icon in the top right corner

The list of devices in the directory is displayed one after the other.

Incoming Call
  

The device is playing the selected ringtone. The display shows the camera view if available, CLIP and Incoming call message.
Pick up call

Touch of the display

The connection is established and the In call mode is switched on.
Reject call

Press the call end button

The incoming call is discontinued and Home page is returned to.
Door unlocking

Press the lock button

A call is set up or not depending on the connection type and the door is unlocked. If automatic call end after unlocking is enabled, the call is ended after door unlocking.

The camera is switched (if installed and configured in the 2N IP intercom).

Press the button for switching the camera /

The display shows a preview from the other camera, identification of the device being called to and the message Incoming Call.
Increase and decrease ringtone volume

Press the button and select the required volume with the + or - button, or by moving the volume marker on the volume bar.

The volume of the ringtone is increased or decreased by one level at each individual press of + or -. If the volume marker is moved, the ringtone is increased or decreased according to the position on the volume bar.

Outgoing Call

The device is playing the ringtone. The display shows the camera view if available, called device ID and Outgoing call message. 
End call

Press the call end button

The outgoing call is discontinued and Home page is returned to.
Door unlocking

Press the lock button

A call is set up or not depending on the connection type and the door is unlocked. If automatic call end after unlocking is enabled, the call is ended after door unlocking.
Switch camera

Press the button for switching the camera /

The display shows a preview from the other camera, identification of the device being called to and the message Incoming Call.
Reject call The call is rejected by the called device, not the 2N® Indoor View user. The display shows Call rejected, the call is terminated and Home page is returned to.
Mute call

Press the Mute button

The call is muted.

In Call

The display shows the camera view if available, or the called device ID if no camera is available. A timer is running at the view.

Mute call

Press the Mute button

The device is in the In call mode but sound is not transferred to the calling device. The Mute icon turns red. "No one hears you" message is displayed.
End call

Press the call end button

The outgoing call is discontinued and Home page is returned to.
Door unlocking

Press the lock button

A call is set up or not depending on the connection type and the door is unlocked. If automatic call end after unlocking is enabled, the call is ended after door unlocking.

Switch camera

Press button to switch camera /

The display shows the camera 2 view, called device ID and timer.

Increase and decrease call volume

Button pressed and required volume selected by pressing the + or - button, or by moving the volume marker on the volume bar.

The volume of the call is increased or decreased by one level at each individual press of + or -. If the volume marker is moved, the ringtone is increased or decreased according to the position on the volume bar.
Cancel call muting

Press the Mute button

The device is in the In call mode and sound is transmitted again to the calling device.

Do Not Disturb Mode




Device is in basic relax status. The doorbell icon is red.

Display Directory

Press the blue backlit phone earpiece button

The list of all available devices is displayed.

Display Call list

Button pressed

The list of all accomplished calls is displayed.
Switch off Do Not Disturb mode

Press the in the right-hand upper corner

DND is deactivated, the doorbell icon turns white.
Display Settings

Button pressed

The Settings section is displayed.

Incoming call in Do Not Disturb mode




  

The device does not play the selected ringtone. The display shows the camera view if available, CLIP and Incoming call message.
Pick up call

Press the call receiving button

The call is connected. The device is in the In call mode.
Reject call

Press the call end button

The incoming call is discontinued and Home page is returned to.
Switch camera

Press the button for switching the camera /

The display shows a preview from the other camera, identification of the device being called to and the message Incoming Call.

Incoming Call with Parental Lock On

The device is playing the selected ringtone. The display shows a preview from the camera, if available, identification of the caller and the message Incoming Call. After pressing the display, an instruction is displayed prompting the user to deactivate the parental lock. A preview of the call is shown in the background.