3.3 Basic Functions
Operational Status Signalling
2N® SIP Speaker, Wall Mounted signals acoustically changes of and transitions between variable operational statuses. There are different tone combinations for each status change. Refer to table below for the list of signals.
Tones | Meaning | |
|---|---|---|
| Calendar activated Used for calendar activation. Use this function, for example, to enable user group ringing in an office. Refer to the Time Profiles subsection in configuration manual for activation code settings. | |
| Calendar deactivated Used for calendar deactivation. Use this function, for example, to disable user group ringing in an office and forward the call(s) to a predefined telephone number (reception desk or user mobile phones). Refer to the Time Profiles subsection in configuration manual for deactivation code settings. | |
| Call prolongation confirmation signalling The maximum call duration is set in 2N® SIP Speaker, Wall Mounted for security reasons; refer to Phone subsection in configuration manual.
| |
| Internal application launched Upon 2N® SIP Speaker, Wall Mounted power up or restart, the 2N® SIP Speaker, Wall Mounted internal application is launched. A successful launch is signalled by this tone combination. | |
| Connected to LAN, IP address received When the internal application has been launched, 2N® SIP Speaker, Wall Mounted logs into the LAN. A successful login is signalled by this tone combination. | |
| Disconnected from LAN, IP address lost This tone combination signals that the UTP cable has been disconnected from 2N® SIP Speaker, Wall Mounted. | |
| Invalid telephone number or invalid switch activation code 2N® SIP Speaker, Wall Mounted allows you to store an extension number or enter the switch opening code. If the number/code is invalid, this tone combination is used. | |
| Default reset of network parameters Enter the default reset code for the network parameters within a 30-second timeout after power up. Refer to Factory Default Reset with Static IP Address and Factory Default Reset with DHCP Client ON for details.
| |
| Call end advance signalling You can set a call time limit in 2N® SIP Speaker, Wall Mounted to avoid call blocking. Push a button on your VoIP telephone to prolong the call. | |
| Connected call when calling from a telephone to 2N® SIP Speaker, Wall Mounted When calling from your VoIP telephone to 2N® SIP Speaker, Wall Mounted, you get a short call connection tone. |
