Siemens Siveillance VMS

Content

About

Version 2018

Used Symbols

About

Siveillance VMS is a powerful IP video management software (VMS) designed for deployments ranging from small and simple to large-scale and high-security. Its single management interface enables the efficient administration of the system including multiple cameras and security devices.

https://www.buildingtechnologies.siemens.com/bt/global/en/security-solution/intelligent-video-surveillance-analytics/siveillance-vms/pages/siveillance-vms.aspx

Version 2018

 

Tested Functions

Siemens Siveillance VMS 2N IP Intercom Version Scan device Video from 2N IP Intercom Audio from 2N IP Intercom Audio to 2N IP Intercom Switch control Events from 2N IP Intercom
12.1a  2.24.0.33.7 (tick) (tick) (tick) (tick) (tick) (tick)

2N IP Intercom Settings

  Requirements for 2N IP Intercom Settings

Enable parameter RTSP Server Enabled in menu Services / Streaming.

Enable Onvif and set authorisation data in menu Services / Onvif.
Go to Service – Automation and fill function for alarm settings in Siveillance.
This is step configuration for firmware 2.22 and higher.

Tested Features

  Scan Device

On the side of Siveillance server go to section "Servers/Recording servers". Do a right click on your recording server and choose "Add Hardware" (if server is not authorized yet, then you have to click on "Authorize first"). Now click on "Add" to add a new device fill credentials that you choosed for Onvif account in the intercom (in our case it is ONVIF/ONVIF). Then click on next.

Now Siemens Siveillance VMS will search for ONVIF devices in your network, once the intercom will be found, it will appear with label "Successfull". If intercom is not checked, then please do so and click on "Next".
On next screen you will see successfully added devices, just click on "Next" again.
Now you have to choose HW from available peripheries of the intercom by checking the items. Typicaly you will use camera, microphone, speaker and some outputs (active ouput, relays). So just check desired HW and click on "Next".
In next step, you have to add the chosen HW to groups. If you did not create the groups yet, you have to do it now. Click on folder of particular group and then click on plus. Group will be added with default name, you can change it once you will add it. Once you will add the group, make sure that you marked it with cursor (it has to be blue) and then click on "ok". This will set the group as default group for this type of HW. Do the same for all groups. Once you will create new deafult groups just click on "Finish".
Once the procedure is finished, you will see added devices and their peripheries. You can also add the peripheries you did not add before to groups (not added peripheries are marked with red cross). Optionally you can rename the device and also the peripheries here. Also you will see video from camera here. If Siveillance is not able to connect to the camera, then please check your firewall settings!

  Video from 2N IP Intercom

Now you can set video parameters, for example resolutions, codec ....

Double-click the shortcut icon XProtect Smart Client on the desktop. The login screen is shown. Type your user name in the User name box, and your password in the Password box. Click Login. After successful login you should add your camera. Go to menu Setup.
Add group, add new view and close to Setup.
Adding a Camera to a View: Do a right click on camera, choose 'Send Camera' and 'Main Window'.

  Audio from 2N IP Intercom

In the Siveillance VMS Video Client you should hear audio from 2N IP Intercom. After you add your camera, drag selected camera and drop it into your View from the camera tree. And then you can hear audio from 2N IP Intercom.

  Audio to 2N IP Intercom

In the Siveillance VMS Video Client you should talk to 2N IP Intercom. After you add your camera, drag selected camera and drop it into your View from the camera tree. And then you can press button and talk.

  Switch control

In the Siveillance VMS Management Client you can set Output Trigger Time for your Outputs.

And in the Siveillance VMS Video Client you should set outputs of 2N IP Intercom. After you add your camera, set one of Digital outputs 2N IP Intercom and with the active the output.

  Events from 2N IP Intercom

As an example an alarm raised when 2N IP Intercom digital input is activated will be configured. Alarm will be raised when a Hardware Input Event is registered in Siveillance VMS. Add Input Rising Event and Input Falling Event for correct function alarm.

Now new Alarm Definition is to be created. Select Create New Alarm, set the parameters for input and click to Save.
When the input is activated, the alarm event will appear in the Siveillance VMS Video Client.

Used Symbols

(tick) - Compatible

(warning) - Work with limitation

(error) - Incompatible