Milestone XProtect Enterprise

Content

About

Version 2016

Version 2014

Used Symbols

About

Founded in 1998, Milestone Systems is a global industry leader in open platform IP video management software. The XProtect platform delivers powerful surveillance that is easy to manage, reliable and proven in thousands of customer installations around the world. With support for the widest choice in network hardware and integration with other systems, XProtect provides best-in-class solutions to video enable organizations – managing risks, protecting people and assets, optimizing processes and reducing costs. Milestone software is sold through authorized and certified partners.

http://www.milestonesys.com/

Version 2016

 

Tested Functions

Milestone XProtect Enterprise 2N IP Intercom Version Scan device Video from 2N IP Intercom Audio from 2N IP Intercom Audio to 2N IP Intercom Switch control Events from 2N IP Intercom

10.0a

2.19.0.28.5

(tick) (tick) (tick) (tick) (tick) (tick)

10.0a

2.17.0.26.1

(tick) (tick) (tick) (tick) (tick) (error)

10.0a

2.14.2.23.4

(tick) (tick) (tick) (tick) (tick) (error)

2N IP Intercom Settings

  Requirements for 2N IP Intercom Settings

As a very first step you have to do a configuration under the section Onvif. Please keep in mind that the Onvif protocol is licensed, for full functionality you need to have a "enhanced video" license for 2N IP Intercom unit. Enable at least one ONVIF user with the Administrator access level in menu Services / Onvif.

Enable parameter RTSP Server Enabled in menu Services / Streaming

Tested Features

  Scan device

On the side of Milestone server do right click on Hardware Devices and and click on Add New Hardware Device.

In next step you can choose if you want to add device manually or if you want to scan your local network for ONVIF ready devices. We choosed automatic scan as it is much eaiser.
Here you can choose if you want to scan local network, or you can define IP range which you want to scan and press next. Then you will see window where you can choose particular manufacturer or it is ok to leave it as it is "All manufacturers" and click on next.
Once the scan will be finished, you will see devices in your network. Find your device and enter valid credentials (we used ONVIF/ONVIF for this FAQ) and press Go. After you will enter valid credentials, it will be possible to pick tde device and click on next. Then you will get a message that device was sucesfully added. No special settings required. Intercom type is recognized automatically.

  Video from 2N IP Intercom

Now the device will appear in tree menu of "Hardware Devices". If you open it, you will see peripheries of the device. If you click on of them, you can change its name. By right clicking on any of them, you can open its Properties and adjust some settings. No special settings required.

  Audio from 2N IP Intercom

No special settings required. Chose the appropriate microphone in the Audio section.

  Audio to 2N IP Intercom

No special settings required. Chose the appropriate speaker in the Audio section.

Alternatively you can configure Talk to speaker button. Enable Setup and configure Overlay Buttons / Application / Talk to speaker(s). Press the button Talk to speaker(s) to stream audio from microphone to the speaker.

  Switch control

Once you have successfully added new hardware devices into the Milestone VMS system (camera, microphone and speaker) which was described in the previous part of this FAQ then you can move to the section "Advanced configuration – Events and Outputs – Hardware outputs" and make a right click on this item. After that click on the "Add New Output"

Once you click on "Add New Output" new window will appear. Click on add and output will be added right away. Now you can Rename the output, select output on device, which will be controled by this virtual output you just created, set its duration and even test it to ensure that you are picking right output. When everything is set, confirm it by pressing OK.
Assign the output to the camera
That´s everything you need to set in the "Milestone Management Application". Right now you can start "Milestones Smart Client" which is surveillance window for video monitoring (for security guys). Once you run this application for the first time you will see several sections on the left side (added cameras, created outputs, detected audio devices) but there will be no video preview on the right side of the screen. You can very easily drag selected camera and drop it into any window on the right side (this is settings only for actual login). You can also activate selected output from this client – choose appropriate output (relay) and click on the “Activate” button as shown in the picture below. Finally you can also enable double way audio – you can set microphone for listening-in and also select appropriate speaker to which you want to talk (you have to press and hold button "Talk").
If you want to create different preview, add cameras permanently into the active area on the right side and add there some special buttons for relay activation or for talking to the speakers then you have to go to the setup mode. Click on the "Setup" button on the top right corner as shown in the next picture. Everything is based on drag and drop principle. You can move there camera, button for output activation or button which will allow you to talk trough the speaker of the device.
Finally you have to click on the "Setup" button again. You will move back to the live preview and you can monitor selected cameras, you will see extra added buttons in the preview and also windows layout will be modified based on your settings. Buttons for talk to speaker and for output activation will be visible, when you will stay on the camera window with cursor of your mouse.
Press the button Output to acivate a switch at 2N IP Intercom.

Output Mapping

Model Output 1 Output 2 Output 3 Output 4 Output 5
2N® IP Verso LED Secured Relay 1 Output 1 None None
2N® IP Vario Relay 1 Relay 2 Relay 1 (Card Reader) Relay 2 (Card Reader) LED1 (Card Reader)
2N® IP Force Relay 1 Output 1 LED Ringing LED In Call LED Door
2N® IP Video Kit Relay 1 LED 1 LED 2 LED 3 Output 1
2N® SIP Audio Converter Relay 1 None None None No


  Events from 2N IP Intercom

 As an example an alarm raised when 2N IP Intercom digital input is activated will be configured. Alarm will be raised when a Hardware Input Event is registered in Milestone VMS. To add the Hardware Input Event follow instructions bellow:

 

 

Event will be generated when signal on input 1 raises. Input 1 in Milestone VMS corresponds with the Helios digital input 1. Select desired input an click OK.

 

Click Save button to apply the changes.

 

Now new alarm definition is to be created. Select Create New Alarm Definition as shown above.

 

 

Define the event which will trigger this alarm. Select the event which was configured in the previous step.
Click Save again to apply the changes.

 

When the 2N IP Intercom input is activated, the alarm event will appear in the Milestone XProtect Smart Client.

Required licenses

  • Enhanced Video for RTSP streaming and ONVIF

Version 2014

 

Tested Functions

Milestone XProtect Enterprise 2N IP Intercom Version Scan device Video from 2N IP Intercom Audio from 2N IP Intercom Audio to 2N IP Intercom Switch control Eventrs from 2N IP Intercom

8.6a

2.10.0.19.3

(tick) (tick) (tick) (tick) (tick) (error)

2N IP Intercom Settings

  Requirements for 2N IP Intercom Settings

As a very first step you have to do a configuration under the section Onvif. Please keep in mind that the Onvif protocol is licensed, for full functionality you need to have a "enhanced video" license for 2N IP Intercom unit. Enable at least one ONVIF user with the Administrator access level in menu Services / Onvif.

Enable parameter RTSP Server Enabled in menu Services / Streaming.

Tested Features

  Video from 2N IP Intercom

On the side of Milestone server do right click on Hardware Devices and and click on Add New Hardware Device.

In next step you can choose if you want to add device manually or if you want to scan your local network for ONVIF ready devices. We choosed automatic scan as it is much eaiser.
Here you can choose if you want to scan local network, or you can define IP range which you want to scan and press next. Then you will see window where you can choose particular manufacturer or it is ok to leave it as it is "All manufacturers" and click on next.
Once the scan will be finished, you will see devices in your network. Find your device and enter valid credentials (we used ONVIF/ONVIF for this FAQ) and press Go. After you will enter valid credentials, it will be possible to pick tde device and click on next. Then you will get a message that device was sucesfully added.
Now you will see the device in list "Hardware Device Summary". Here you can edit its name simply by clicking in filed "Hardware device name".
Now the device will appear in tree menu of "Hardware Devices". If you open it, you will see peripheries of the device. If you click on of them, you can change its name. By right clicking on any of them, you can open its Properties and adjust some settings. In pictures below, you can see how to adjust camera settings right from the XProtect Application.

  Audio to 2N IP Intercom

Enable Setup and configure Overlay Buttons / Application / Talk to speaker(s). Press the button Talk to speaker(s) to stream audio from microphone to the speaker.


  Switch control

Once you have successfully added new hardware devices into the Milestone VMS system (camera, microphone and speaker) which was described in the previous part of this FAQ then you can move to the section "Advanced configuration – Events and Outputs – Hardware outputs" and make a right click on this item. After that click on the "Add New Output".

Once you click on "Add New Output" new window will appear. Click on add and output will be added right away. Now you can Rename the output, select output on device, which will be controled by this virtual output you just created, set its duration and even test it to ensure that you are picking right output. When everything is set, confirm it by pressing OK.
Now you have to tie the output with camera of the device, otherwise you won't be able to display it in Smart Client. In firts point do a right click on "Camera" and choose "Properties". Then is second point choose "Output". Now you can pick desired device and see outputs added to this device before. Choose desired output in third point and then move it by clicking on arrow in fourth point.
That´s everything you need to set in the " Milestone Management Application ". Right now you can start " Milestones Smart Client " which is surveillance window for video monitoring (for security guys). Once you run this application for the first time you will see several sections on the left side (added cameras, created outputs, detected audio devices) but there will be no video preview on the right side of the screen. You can very easily drag selected camera and drop it into any window on the right side (this is settings only for actual login). You can also activate selected output from this client – choose appropriate output (relay) and click on the “Activate” button as shown in the picture below. Finally you can also enable double way audio – you can set microphone for listening-in and also select appropriate speaker to which you want to talk (you have to press and hold button "Talk").

If you want to create different preview, add cameras permanently into the active area on the right side and add there some special buttons for relay activation or for talking to the speakers then you have to go to the setup mode. Click on the "Setup" button on the top right corner as shown in the next picture. Everything is based on drag and drop principle. You can move there camera, button for output activation or button which will allow you to talk trough the speaker of the device.

Finally you have to click on the "Setup" button again. You will move back to the live preview and you can monitor selected cameras, you will see extra added buttons in the preview and also windows layout will be modified based on your settings. Buttons for talk to speaker and for output activation will be visible, when you will stay on the camera window with cursor of your mouse.

Required licenses

  • Enhanced Video for RTSP streaming and ONVIF

Used Symbols

(tick) - Compatible

(warning) - Work with limitation

(error) - Incompatible