Axxon Next

Content

About

Version 4

Version 3

Used Symbols

About

Meet Axxon Next, a next-generation open-platform video management software (VMS). Thanks to exciting innovations from AxxonSoft, the Axxon Next platform has reached a whole new level of performance, reliability, efficiency, functionality and accessibility.

Video surveillance systems based on Axxon Next can scale infinitely: there are no restrictions on the number of video servers, workstations or video cameras. Axxon Next also plays well with other devices and systems. Support for over 1500 models of IP cameras is included, as well as remote access from mobile devices and a web interface. The software’s intuitive interface makes navigation a breeze and increases workflow efficiency.

Security needs of all sizes – from those of large-scale distributed facilities to the smallest sites – can be efficiently met with Axxon Next video management software. Every license includes full, unrestricted VMS functionality, even on systems of just one camera. Users on tight budgets will appreciate the free version of the program, which supports up to 16 camera channels.

http://www.axxonsoft.com/products/axxon_next/

Version 4


Tested Functions

Version VMS Version Helios IP Scan device Video from HIP Audio from HIP Audio to HIP Switch control Events from HIP

Axxon Next

4.0.0.4316

2N Helios IP

2.19.0.28.5

(tick) (tick) (tick) (tick) (tick) (error)
2N Helios IP

2.17.0.26.1

(tick) (tick) (tick) (tick) (tick) (error)

2N Helios IP Settings

  Requirements for 2N Helios IP

Open web browser and enter IP address of intercom. Go to Services – Streaming – RTSP and enable parameter RTSP Server Enabled.

 

Enable Onvif and set authorisation data in menu Services / Onvif.

Tested Features

  Scan device

The Axxon Next client can be started manually using the Start menu, which is intended for launching user programs in Windows. To start working with the software, perform the following steps: Select Start - All Programs - Axxon Next - Axxon Next. The Axxon Next client will then launch and an authorization window will appear. Enter the user name and password and click Connect. System objects form the basis for configuring the Axxon Next software package; you can set them up in the Devices section of the Settings tab. In the Devices section Helios IP device should detected automatically.

Refer to the IP address to determine which intercom you want to add. Enter ONVIF username and password to their respective fields and push the green plus button.

  Video from HIP

Select added camera in the device list on the left hand side.

  Audio from HIP

Select the camera's microphone from the device list. Again set TCP as the transport protocol.

In the viewing section of the client you can then mute and unmute audio feed from the camera.

 

  Audio to HIP

Select the camera's speaker from the device list and enable it.

In the viewing section of the client you can then toggle Audio Back Stream to the intercom.

 

  Switch control

Select the camera's relay from the device list and enable it. You can also choose whether the relay's default position.

 

You can then switch the relay states from the Viewing Mode of the client.

 


Required licenses

  • Enhanced Video for RTSP streaming and ONVIF

Version 3

Tested Functions

Version VMS Version Helios IP Scan device Video from HIP Audio from HIP Audio to HIP Switch control Events from HIP

Axxon Next

3.6.3.302

2N Helios IP

2.12.0.21.1

(tick) (tick) (error) (tick) (tick) (error)

2N Helios IP Settings

  Requirements for 2N Helios IP

Enable parameter RTSP Server Enabled in menu Services / Streaming.

Enable Onvif and set authorisation data in menu Services / Onvif.

Tested Features

  Video from HIP

The Axxon Next client can be started manually using the Start menu, which is intended for launching user programs in Windows. To start working with the software, perform the following steps: Select Start - All Programs - Axxon Next - Axxon Next. The Axxon Next client will then launch and an authorization window will appear. Enter the user name and password and click Connect. System objects form the basis for configuring the Axxon Next software package; you can set them up in the Devices section of the Settings tab.

In the Devices section Helios IP device should detected automatically.
Refer to the IP address to determine which intercom you want to add.
Enter ONVIF username and password to their respective fields and push the green plus button.

  Audio to HIP

Select the camera's speaker from the device list and enable it. In the viewing section of the client you can then toggle Audio Back Stream to the intercom.

  Switch control

Select the camera's relay from the device list and enable it. You can also choose whether the relay's default position. You can then switch the relay states from the Viewing Mode of the client.


Required licenses

  • Enhanced Video for RTSP streaming and ONVIF

Used Symbols

(tick) - Compatible

(warning) - Work with limitation

(error) - Incompatible