Automatic Number Plate Recognition solution (ANPR)

Tattile ANPR & 2N intercoms

On this page we will go through connecting 2N IP Intercom with the Automatic Number Plate Recognition solution (ANPR) of Tattile and will define in this way an access control system based on the recognition of a car-plate and a RFID card.

In this scenario you are able to send the code of the car-plate, identified by the camera Vega Basic of Tattile, towards the 2N® IP Force intercom, connected via Wiegand. Our intercom system is controlling the access according to the card-code or the car-plate of each user. See that FW 2.23 supports double card identification for each user!

Tattile HW & SW

ProductFW

Tattile ANPR System, model Vega Basic F01750

All versions

2N IP Intercom HW & SW

ModelDescriptionFW
9151102CHRW2N® IP Force – 2 buttons & HD camera (card reader ready) & 10W speaker 2.23.0.32.6
91510172N® IP Force – 13.56MHz smart card reader NFC ready  (suitable for IP Force only) it includes Wiegand interface, 2 logical inputs, 1 relay, 1 active output and Tamper switch 
9134174Mifare RFID key fob 13.56MHz 

Connection

Connect the Wiegand module of 2N® IP Force (see connector below) to the connector of the Vega Basic camera:

2N® IP Force Wiegand moduleTattile Vega BasicSignal
GND15GND
W08W0
W110W1

2N® IP Force connection

Vega Basic connection

 

Configuration

2N® IP Force

Wiegand module and Door/Switch

Set up the Interface Mode= Input and Receive Code Format = Wiegand 26-bit. Configure the Associated Switch and the Switch (in figure Door Lock Switch and Switch 1).

Directory/Users

Configure a User that will include n.2 Card id: the first one is RFID card number, the second one is the code received from the Wiegand connection, when the camera of Tattile decodes a valid Plate, associated to this User.

See here the received codes (via RFID and via Wiegand).

Tattile Vega Basic

Set the camera according to next pictures.

Plate reader – Events Actions webpage

 

 

Webpage dedicated to the single Event Action

 

 

System – Serial Ports webpage