CounterPath Bria

Content

About

	Phone web page	CounterPath Bria
	Default login	N/A
	Default password	N/A
	Video support	Yes

Version 3

Tested with

CounterPath Bria	2N IP Intercom	Audio	Video	Switch Control	Video Preview	Call Completed Elsewhere	Secure RTP (SRTP)
3.7.5.92486	2.19.0.28.5
3.7.5.92486	2.13.3.22.6						Un-Tested

Tested PBXs

Tested with CUCM v6.0.1, CUCM v7.1.3 and Netstar.

Settings

Direct Call

Setting of 2N IP Intercom

Connect to the 2N IP Intercom intercom web configurator.

Enable one of the quick dial button position. When it is enabled, specify position name and phone number of the Linphone client.

set the user in Directory / Users to dial direct IP call according to Linphone settings. Linphone has an ip address 10.27.1.51, set the Phone Number to sip:10.27.1.51 – see the picture below.

To recieve calls from Counter-Path Bria application it is important to change Call anwering mode to Automatic in Services / Phone / Call settings.

For Video to function correctly it is also needed to have "Polycom compatibility" enabled

Setting of Counter-Path Bria for Android

For direct call go to Dialer through Dial pad icon and in tho the upper grey line write down the sip:x@ip_address, where ip_address is IP address of your intercom. On the picture IP address is 10.27.24.10. and x some random number for example 1.

To switch on Video during the Call, swipe your finger on the screen from right to left.

Settings with SIP proxy

Setting of 2N IP Intercom

To set your 2N IP Intercom device to communicate with SIP over your SIP Proxy (or PBX), you need to fill in credentials like Phone number, password and IP address of your SIP Proxy like in following picture. In this case IP address of SIP proxy is 10.27.1.66 and Phone Number is 8002.

To recieve calls from Counter-Path Bria application it is important to change Call anwering mode to Automatic in Services / Phone / Call settings.

In next step it is needed to create users with Linphone which will be called from 2N IP Intercom, in Directory / Users.

For Video to function correctly it is also needed to have "Polycom compatibility" enabled

Setting of Counter-Path Bria for Android

To set up account in Counter-Path Bria for your SIP proxy go to Settings (cogwheel button) / Accounts

In next screen choose SIP "Making calls" and fill in your account details:

To switch on Video during the Call, swipe your finger on the screen from right to left.

Secure RTP (SRTP)

Setting of 2N IP Intercom

Go to SIP settings in Services and in Advanced settings enable recieving and transmitting of SRTP calls.

Setting of Counter-Path Bria for Android

To enable SRTP encryption in Counter-path Bria go to your Account for SRTP / Account Advanced / and Change Encrypt Audio from never to Always.

Version 2

Tested with

CounterPath Bria	2N IP Intercom	Audio	Video	Switch Control	Video Preview	Call Completed Elsewhere	Secure RTP (SRTP)
2.4 (build 49274)	2.13.3.22.6						Un-Tested

Tested PBXs

Tested with CUCM v6.0.1, CUCM v7.1.3 and Netstar.

Settings

Setting of 2N IP Intercom and Bria

Bria softphone - How to configure it with 2N IP Intercom (using SIP Proxy)

If you would like to make video calls from your 2N IP Intercom to your smartphone, you will need application which supports video transmission. One of those applications is Bria which is available for iOS and also for Android mobile phones.

Note: For proper video transmission must your SIP Proxy support the codec H.264! (if more video codecs are supported, then allow H.264 as the only video codec in case of troubleshooting)

2N IP Intercom settings

Connect to the 2N IP Intercom web configurator and enable one of the quick dial button position. When it is enabled, then specify position name and phone number of the Bria client.

In the next step register your 2N IP Intercom to SIP proxy (IP PBX).

As a last setting in 2N IP Intercom, go to Advanced Settings -> Video Codecs and set the video resolution and bitrate according to picture below. If you set better parameters, it can happen that the video will be jamming (this depend on quality of your network).

BRIA setting

Download Bria application from App Store (iOS) or Google Play (Android) and install it. Please do not forget to buy also Video license for Bria application if you want to make video calls. Then run the application and fill in information which is necessary for correct registration.

Then move to Account Advanced setting and check if the SIP Network Traversal is activated for Wi-Fi and also for Mobile if you call via mobile data connection.

After this go to Account Specific Features and activate video parameters according to the picture below.

As a last step click the Register button and register application to SIP Proxy.

Now if you call from/to Bria application from/to 2N IP Intercom, you will be able to see a video.

CUCM 7.1.3

Basic Settings

Requirements for Phone Settings

Allow the H.264 video codec.

Requirements for 2N IP Intercom Settings

For video, set RTP Payload type (1) to 99, RTP Payload type (2) to 0 in the Advanced Settings / Video Codecs menu.

CUCM 6.0.1

Basic Settings

Requirements for Phone Settings

Allow the H.264 video codec.

Requirements for 2N IP Intercom Settings

For video, set RTP Payload type (1) to 99, RTP Payload type (2) to 0 in the Advanced Settings / Video Codecs menu.

Used Symbols

- Verified with video

- Verified with audio only

- Work with limitation

- Incompatible