Yealink VP-2009

Content

About

Version 22

Used Symbols

About

Phone web page

Yealink VP-2009
Default login admin
Default password admin
Video support Yes

  Version 22

Tested Functions

Yealink VP-2009
 2N IP Intercom
Direct Call Netstar
Audio
Video
Switch Control
Video Preview
Call Completed Elsewhere

22.20.9.2, 22.20.9.1, 22.10.43.10

Hardware Version VideoPhone-V8420

2.13.3.22.6

(tick) (tick) (tick) (tick) (tick) (error) (error)

Problem with video consistency on Yealink VP-2009 of version 22.10.43.10, can be solved by upgrade to version 22.20.9.1 or higher.

Settings

Direct Call

  Basic Settings

2N IP Intercom Settings

Basic Settings / Phone book:

  1. Position enabled - set Yes
  2. Name - set the personal name for the selected telephone directory position. This parameter is optional and facilitates the telephone directory search.
  3. Phone Number - IP address of the called party in the format sip:ip_address_yealink, e.g.: sip:10.0.27.254.

Yealink VP-2009

The terminal is ready for Direct Call after Reset to Factory Default (Upgrade menu, Reset to Factory button). When you are calling to 2N IP Intercom, you should call the 2N IP Intercom IP address.

CUCM 6.0.1

  Basic Settings

Requirements for 2N IP Intercom Settings

For video, set RTP Payload type (1) to 0, RTP Payload type (2) to 99 or RTP Payload type (1) to 99, RTP Payload type (2) to 0 in the Advanced Settings / Video Codecs menu.

Requirements for Phone Settings


CUCM 7.1.3

  Basic Settings

Requirements for 2N IP Intercom Settings

For video, set RTP Payload type (1) to 0, RTP Payload type (2) to 99 or RTP Payload type (1) to 99, RTP Payload type (2) to 0 in the Advanced Settings / Video Codecs menu.

 

Requirements for Phone Settings

Older Versions of Intercom

  Basic Settings

 2N IP Intercom Settings

Basic Settings / Phone book:

  1. Position enabled - set Yes
  2. Position name - set the personal name for the selected telephone directory position. This parameter is optional and facilitates the telephone directory search.
  3. Number 1 - IP address of the called party in the format sip:ip_address_yealink, e.g.: sip:192.168.1.3.

Advanced Settings / Video Codecs:

  1. RTP payload type (1) - set 99.
  2. RTP payload type (2) - set 0.
  3. Polycom kompatibility mode - set Off.

Yealink VP-2009

The terminal is ready for Direct Call after Reset to Factory Default (Upgrade menu, Reset to Factory button). When you are calling to 2N IP Intercom, you should call the 2N IP Intercom IP address.

Used Symbols

(tick) - Verified with video

(green star) - Verified with audio only

(warning) - Work with limitation

(error) - Incompatible