Cisco SPA 525G2
Content
About
| Phone web page | Cisco SPA 525G2 |
| Default login | N/A | |
| Default password | N/A | |
| Video support | Only via Streaming |
Version 7
Tested with
| Cisco SPA 525G2 | 2N IP Intercom | Direct call | Secure RTP (SRTP) | CME v9.0 | UC 540 v12.4 | UC 320W v2.1.4 |
|---|---|---|---|---|---|---|
| 7.6.2
| 2.18.0.27.5 |  | | Un-Tested | Un-Tested | Un-Tested |
2.17.1.26.5 | | Un-Tested | Un-Tested | Un-Tested | Un-Tested | |
| 7.4.3 | 2.6 and older | | Un-Tested |  | | |
Settings
Other Functions
2N IP Intercom Settings
Change the MJPEG video resolution to QVGA (320x240)
 |
Cisco SPA525G2 Settings
User settings
Configure Camera Access URL to rtsp://<HIP_IP_address>/mjpeg_stream e.g. rtsp://10.27.20.4/mjpeg_stream
 |
How to Use
Video can be switched on during an incoming or outgoing call to 2N IP Intercom by pressing the button under the camera sign. The door can be opened by a DTMF code (usually 00*) during the call. To toggle to the call, press the button under the telephone sign.
Call mode - the door can be opened by the DTMF code
|
 |
Streaming does not work with Cisco SPA 525G2 of version 7.5.3. We recommend you to upgrade to phone firmware version 7.6.2.
Settings for version of Intercom firmware 2.6 and older.
Description
This function allows you to watch video from 2N IP Intercom and also during the call.
Firmware 7.4.3 is working, firmware 7.5.3 is not working.
2N IP Intercom Settings
 |
SPA 525 Settings
Access URL: rtsp://x.x.x.x/img/jpgvideo.sav
Access Password: 2n
 |
How to Use
Video can be switched on during an incoming or outgoing call to 2N IP Intercom by pressing the button under the camera sign. The door can be opened by a DTMF code (usually 00*) during the call. To toggle to the call, press the button under the telephone sign.
Call mode - the door can be opened by the DTMF code.
 |
|
Used Symbols
- Verified with video
- Verified with audio only
- Work with limitation
- Incompatible