Wildix VoIP PBX

Content

About

Version 3

Version 2

Used Symbols

About

Wildix PBX is available as Physical or Virtual appliance or in the Cloud. Wildix software is fully integrated into the hardware which helps to avoid problems related to third-party products integration. Multiple Wildix systems can be connected to provide a single global cluster. Wildix VoIP PBX is a reliable communication system for small or large business, it is scalable, flexible and it easily adapts to the needs of any company.

Version 3

Tested with

Wildix VoIP PBX 2N IP Intercom Registration Calls Secure RTP (SRTP)
3.0 2.4.0.8.8 (tick) (tick) Un-Tested

Settings

The process is the same as with Wildix VoIP PBX version 2.

Version 2

Tested with

Wildix VoIP PBX 2N IP Intercom Registration Calls Secure RTP (SRTP)
2.0 2.4.0.8.8 (tick) (tick) Un-Tested

Settings

  Wildix VoIP PBX Settings

The 2N IP Intercom can be integrated into a Wildix VoIP PBX which is a SIP Protocol based IP PBX. 2N IP Intercom operates as an SIP subscriber and can stream its video to the IP telephone. No additional equipment is needed for full integration of the door intercom in the telecom system .

Tested models:

PBX

WGW08 - WGW16 - WGW40 - WGW90 - WGW250 - WGW500 - WGW1000 - WGW5000 

Hotel PBX

WGWH20 - WGWH50 - WGWH100 - WGWH250 - WGWH500 - WGWH1000

Compatibility test:

  • Audio call
  • Video call
  • DTMF transfer

As a very first step configure new user in Wildix PBX. Select the PBX IP address from your WEB browser and go to section "User" (Utenti) and add a new user.

Click “+”  and fill the extension number (Interno) and description (Nome).
Select the dialplan > TAB Dialplan.
At the end of this procedure and after the configuration of  2N IP Intercom you can see the status of this new user as showed in the picture below:
The green led shows that  2N IP Intercom is registered on PBX. If you place a mouse on the "user", you will see the information about it: name, IP address and transport type.

  2N IP Intercom Settings

From 2N IP Intercom side go to the section "Advanced Settings" and tab "SIP Settings". Fill in "User ID" and "Password" which matches to the "ID" and "Password" set in the Wildix  side, and “Domain”, “Proxy Address” and “Registrar Address”. See below:

To verify that you have successfully registered  2N IP Intercom terminal into Wildix PBX side, go to the section "Information” in the  2N IP Intercom.

Used Symbols

(tick) - Verified with video

(green star) - Verified with audio only

(warning) - Work with limitation

(error) - Incompatible