FRITZ!Box 7490

Content

About

Version 6.83

Version 6.80

Version 6.50

Used Symbols

About

The FRITZ!Box 7490 is the hub of your home network, connecting your computers and network devices with the Internet. You can operate the FRITZ!Box as an Internet router on a DSL or VDSL line. The FRITZ!Box is equipped with ports for computers, telephones and USB devices and supports the wireless technologies WLAN and DECT. You can use the FRITZ!Box as a wireless LAN access point for wireless devices like notebooks, tablets or smartphones and as DECT base station for your cordless telephones. Connected telephones use the FRITZ!Box as a telephone system (PBX). The FRITZ!Box integrates connected computers and network devices into your private home network. The devices can exchange data with each other and enjoy shared access to USB hard drives, USB printers and other USB devices. The FRITZ!Box transmits music, video and image files to suitable playback devices in the home network.

Version 6.83

Version detail: 6.83

 

Tested with

  Yealink T46G

2N Helios IP

2.20.0.29.5

(tick)

  FRITZ!Box 7490 Settings

The FRITZ!Box user interface can be opened on any computer connected with the FRITZ!Box. Start a web browser on your computer. Enter fritz.box in the address line of the browser. The FRITZ!Box user interface opens and.enter the password. If you are logging in for the first time, you have to modify the default user password.

In settings FRITZ! BOX go to:  Telefonie > Telefoniegeräte > Neues Gerät einrichten and choose  Türsprechanlage
 
 
Choose  LAN / WLAN (IP-Türsprechanlage) and name your 2N Helios IP device. For example: Enter, Bell, Intercom Helios etc...

Enter username and password and click to Weiter.

You can skip this settings and click to 2x Weiter.

 
You can see 2N Helios in FRITZ! Box and click to Übernehmen.
Now click to DECT on Fritz! Box and click to OK.

  2N Helios IP Settings

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download www.2n.cz). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between FRITZ! Box and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in FRITZ! Box).

Version 6.80

It is reported, that sometimes only communication in one direction is possible and registration status is not shown in Websurface. This problem is being fixed by AVM.

Version 6.50

Version detail: 6.50

 

Tested with

  FRITZ!Fon C4

2N Helios IP

2.14.0.23.2

(tick)

  FRITZ!Box 7490 Settings

 The FRITZ!Box user interface can be opened on any computer connected with the FRITZ!Box. Start a web browser on your computer. Enter fritz.box in the address line of the browser. The FRITZ!Box user interface opens and.enter the password. If you are logging in for the first time, you have to modify the default user password.

In settings FRITZ! BOX go to:  Telefonie > Telefoniegeräte > Neues Gerät einrichten and choose  Türsprechanlage

Choose  LAN / WLAN (IP-Türsprechanlage) and name your 2N Helios IP device. For example: Enter, Bell, Intercom Helios etc...
FRITZ! Box automatically assign internal number to intercom. In this example  620. Enter password  ( Kennwort) and click to  Weiter.
You can skip this settings and click to  Weiter.
You can see 2N Helios in FRITZ! Box.
Go to settings of your Intercom.
Now you can add code for lock and link for camera.

  2N Helios IP Settings

Open web browser and enter IP address of intercom (default: admin/2n). If you don´t know IP of your Intercom, you can use 2N Helios IP Network Scanner (download www.2n.cz). Go to Service – Phone – SIP 1 and fill Intercom Identity – Authentication – SIP Proxy – SIP Registrar and save settings. Connection between FRITZ! Box and 2N Helios IP is now ready. In directory you can set, which numbers you will call from 2N Helios IP (you can ad numbers from which are in FRITZ! Box).

In 2N Helios IP with firmware version 2.10 and higher needs to be set parameter "Connection type" in the row Camera API to Unsecure (TCP) and switch off Authentication. As it seems in the picture below (red border).

Used Symbols

(tick) - Verified with video

(green star) - Verified with audio only

(warning) - Work with limitation

(error) - Incompatible