Aastra 400

Content

About

Version

Used Symbols

About

The Aastra 400 opens the full performance spectrum of modern business communication: Aastra 400 offers an all-in-one Unified & Collaborative Communications solution which is seamlessly integrated into the system.

The product range includes communication servers, terminals, software and mobility solutions as well as unified and collaborative communication applications.

Version

Tested with

Aastra 400
2N IP Intercom
Registration
Calls
- 2.8.0.17.2 (tick) (tick)

Settings

  Setting of Aastra 400 with 2N IP Intercom

The 2N IP intercom can be integrated into an Aastra 400. SIP Protocol based device. It operates as an SIP subscriber and can stream its video to the BluStar video terminals. Due to the fully integration of the door intercom in the telecom system, no additional equipment is needed.

1. As a very first step configure new client in Aastra IP PBX. Follow the steps from chart on (Pic. 1) and example of configuration on (Pic 2.), (Pic. 3).

Pic. 1

Pic. 2

Pic. 3

 

2. Then configure 2N IP intercom. Check the steps from chart on (Pic. 4) and example of configuration on (Pic 5).

Pic. 4

Pic. 5

 

3. We have tested audio call, video call and sending/receiving of DTMF tones. Check tested products in the chart (Pic. 6). In the picture (Pic. 7) see tested scenario, all tested functions were compatible!

Pic. 6

Pic. 7

Used Symbols

(tick) - Verified with video

(green star) - Verified with audio only

(warning) - Work with limitation

(error) - Incompatible