7. Technical Parameters

Audio

  • Loudspeaker: 1 W / 8 Ω

Power Supply

  • 12 V ±15 % / 1 A 
  • PoE 802.3af (Class 0–12.95 W)

Interface

  • LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 male (pigtail)
  • Recommended cabling: Cat-5e or higher
  • Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
  • Passive switch: NO/NC contact, up to 30 V / 1 A AC/DC
  • Active switch output: 8 to 12 V DC according to power supply (PoE: 10 V; adapter: supply voltage minus 2 V), up to 600 mA

Tamper switch: part of 2N Access Unit M

  • Inputs (Input 1,2): passive/active mode (−30 V to +30 V DC)

        OFF = open or Uin > 1.5 V

        ON = short-circuited or Uin < 1.5 V

RFID card reader

  • Frequency: 13.56 MHz & 125 kHz
  • Supported 13.56 MHz cards (card serial number is only read):
    • ISO14443A (Mifare, DESFire)
    • PicoPass (HID iClass)
    • FeliCa
    • ST SR(IX)
    • 2N® Mobile Key
  • Supported 125 kHz cards: EM41xx

Bluetooth

  • Bluetooth 5.0 in compliance with BLE (Bluetooth Low Energy)
  • RX sensitivity: up to −94.8 dBm per 1Mbps
  • Support of higher applications: Android 6.0 Marshmallow and higher, iOS 12.0 and higher

Mechanical properties

  • Cover: robust ASA/PC construction material, which is also used for such car parts as lateral mirrors, radiator masks, etc. + chemically hardened 3 mm thick glass
  • Operating temperature: −40 °C to 60 °C
  • Working relative humidity: 10 % – 95 % (non-condensing)
  • Maximum altitude for intended use: 2000 m a.s.l.
  • Storage temperature: −40 °C to 70 °C
  • Dimensions: 132 (H) x 50 (W) x 27 (D) [mm]
  • Weight: 460 g
  • Covering level: IP55 (for basic surface main unit mounting, 2.2.1 Surface Mounting)