4. Technical Parameters

Audio

  • Speaker0.8 W / 8 Ω

Interface

  • Power supply12 V ±15 % / 1 A 
  • PoEPoE 802.3af (Class 0–12.95 W)
  • LAN: 10/100BASE-TX with Auto-MDIX, RJ-45
  • Recommended cablingCat-5e or higher
  • Supported protocolsDHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
  • Passive switchmake and break contact, up to 30 V / 1 A AC/DC
  • Active switch output8 to 12 V DC according to power supply (PoE: 10 V; adapter: source voltage minus 2 V), up to 600 mA
  • Tamper switch is part of the 2N Access Unit
  • Inputs: passive / active mode (−30 V to +30 V DC)
    • OFF = open or Uin> 1.5 V
    • ON = short-circuit or Uin< 1.5 V

RFID card reader

  • Frequency: 13.56 MHz & 125 kHz
  • Supported 13.56 MHz cards (only card serial number is read):
    • ISO14443A (MIFARE DESFire)
    • PicoPass (HID iClass)
    • FeliCa
    • ST SR(IX)
    • 2N® Mobile Key
    • HID SE ((Seos, iClass SE, MIFARE SE) valid for secured cards)
  • Supported 125 kHz cards: EM4100, EM4102 

2N® IP Verso – Bluetooth module

  • Bluetooth 4.0 Compliant (Bluetooth Low Energy, BLE)
  • Security: asymmetric RSA-1024 and symmetric AES-128 encryption
  • RX sensitivity: up to −93 dBm
  • Range: adjustable (short ~ 0.5m, medium ~ 2m, long ~ up to 10m)
  • Power consumption: 20mA at 12V DC
  • Operational temperature range: −40°C ~ +60°C
  • Storage temperature range: −40°C ~ +70°C
  • Dimensions: 97 x 105 x 30mm
  • Compatible with 2N® IP Verso, 2N® LTE Verso and 2N Access Unit
  • Mobile app. support: Android 6.0 Marshmallow and higher, iOS 12.0 and higher

Mechanical properties

  • Cover: robust zinc casting with surface finish (minor surface shade nuances are acceptable)
    • 91550XX – NICKEL
      • Material – Zamak 410 – Zn95Al4Cu1
      • Surface treatment – Zn/Cu20/Ni25b max. 80 µm
    • 91550XXB – BLACK  
      • Material – Zamak 410 – Zn95Al4Cu1
      • Surface treatment – Cataphoretic coating Black 30 µm, RAL 9004 – Signalschwarz (colour is not guaranteed – it is cataphoretic)
  • Operating temperature−40 °C to 60 °C
  • Operating relative humidity10 % – 95 % (non-condensing)
  • Maximum altitude for intended use: 2000 m a.s.l.
  • Storage temperature−40 °C to 70 °C
  • Dimensions:
    • Wall (surface) mounting frame:
      • 1 module: 107 (W) x 130 (H) x 28 (D) mm
      • 2 modules: 107 (W) x 234 (H) x 28 (D) mm
    • Flush mounting frame:
      • 1 module: 130 (W) x 153 (H) x 5 (D) mm
      • 2 modules: 130 (W) x 257 (H) x 5 (D) mm
    • Flush mounting box (minimum hole dimensions):
      • 1 module: 108 (W) x 131 (H) x 45 (D) mm
      • 2 modules: 108 (W) x 238 (H) x 45 (D) mm
  • WeightMax net weight: 2 kg / max. gross weight: 0.5 kg – based on configuration
  • Cover ratingIP54